The Smart Universal Configurator is an easy use graphical interface configuration tool for smartSCANNDY devices. It helps to program a smartSCANNDY the way you need it. It is quite easy and no programming skills are necessary. With some simple mouse clicks you can change the functions of buttons, configure which data should be stored, define the format of the data record and many other functions.
Turn on your smartSCANNDY and connect it to your PC, an icon „Smart Universal Configurator“ will pop up on the desktop. Just double – click and start the configuration of your smartSCANNDY
The configuration – parameter are described in their different areas. After changing of the configuration it needs to be restored and the scanner needs to be ejected under Windows before ejecting the USB plug. This will automatically be done by usng the button “Save and eject”. In the following an overview about the different condiguration areas:
Each individual key can be programmed for your individual needs by selecting the wished function (RFID or Barcode) in the dropdown-Menu.
Here you configure if you like to transfer data as text – file (for example) per USB, USB – HID or by Bluetooth. You can choose up to 3 output – modi, selecting under „Keys“ at keyboard – layout.
Ideal for connection at SAP Systems (for example). You describe at this configuration point your preferred keyboard – combination. Inside the keyboard – layout under menu „Keys“ you will choose the preferred key and select “Send static data, see [Static Data(HID)]“ . Now all data will be used as the keyboard layout has been configured.
Under this setting you can adjust how you would like to output for example your RFID data either in ASCII or hexadecimal.
Here you can make a setting if you would like to hear a piep – tone and/or feel a vibration in a case of an error or even nothing will happen. The same is possible for the correct scanning or deleting data from device.
If you like to run several smartSCANNDYs and all devices shall need the same setting you only need to configur it once. Go to „Service“ and press the button “open smart ini.config file.“, copy this file and copy it into the respectivly program – structure of the other scanner.